二 广域网协议设置( 三 )


ed state to up
00:04:11: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 572
#router1
4. ISDN访问首都在线263网实例:
本地局部网地址为10.0.0.0/24,属于保留地址,通过NAT地址翻译功能,局域网用户可以通过ISDN上263网访问Internet 。263的ISDN电话号码为2633,用户为263,口令为263,所涉及的命令如下表:
具体配置如下:
hostname Cisco2503
!
isdn switch-type basic-net3
!
ip subnet-zero
no ip domain-lookup
ip routing
!
interface Ethernet 0
ip address 10.0.0.1 255.255.255.0
ip nat inside
no shutdown
!
interface Serial 0
shutdown
no description
no ip address
!
interface Serial 1
shutdown
no description
no ip address
!
interface bri 0
ip address negotiated
ip nat outside
encapsulation ppp
ppp authentication pap callin
ppp multilink
dialer-group 1
dialer hold-queue 10
dialer string 2633 
dialer idle-timeout 120
ppp pap sent-username 263 password 263
no cdp enable
no ip split-horizon
no shutdown
!
ip classless
!
! Static Routes
!
ip route 0.0.0.0 0.0.0.0 bri 0
!
! Access Control List 2
!
access-list 2 permit any
!
dialer-list 1 protocol ip permit
!
! Dynamic NAT
!
ip nat inside source list 2 interface bri 0 overload
snmp-server community public ro
!
line console 0
exec-timeout 0 0
!
line vty 0 4
!
end
5.Cisco765M通过ISDN拨号上263
由于Cisco765的设置命令与我们常用的Cisco路由器的命令不同,所以以下列举了通过Cisco765上263访问Internet的具体命令行设置步骤 。
>set system c765
c765> set multidestination on
c765> set switch net3
c765> set ppp multilink on
c765> cd lan
c765:LAN> set ip routing on
c765:LAN> set ip address 10.0.0.1
c765:LAN> set ip netmask 255.0.0.0
c765:LAN> set briding off
c765:LAN>cd
c765> set user remotenet
New user remotenet being created
c765:remotenet> set ip routing on
c765:remotenet> set bridging off
c765:remotenet> set ip framing none
c765:remotenet> set ppp clientname 263
c765:remotenet> set ppp password client
Enter new Password: 263
Re-Type new Password: 263
c765:remotenet> set ppp authentication out none
c765:remotenet> set ip address 0.0.0.0
c765:remotenet> set ip netmask 0.0.0.0
c765:remotenet> set ppp address negotiation local on
c765:remotenet> set ip pat on
c765:remotenet> set ip route destination 0.0.0.0/0 gateway 0.0.0.0
c765:remotenet> set number 2633
c765:remotenet> set active
命令描述如下:


推荐阅读