WS-X4232-L3 路由模块配置和概述为Catalyst 4000家族( 五 )


line aux 0;
line vty 0 4;
login;
!;
end;
bang-rp#sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route; Bridge;
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID;;;;;Local Intrfce;;;Holdtme;Capability Platform; Port ID;
liki;;;Gig 1;;;;
160 T S;;;
WS-C3508G-Gig 0/1

!--- Liki is connected to gig 1 on the router. We only see Liki from
!--- the router, we do not see it from the supervisor.;

JAB02380AYG(bang)Port-channel1;;;148; T S;;;;WS-C4003; 3/2;
JAB02380AYG(bang)Port-channel1;;;147; T S;;;;WS-C4003; 3/1;
结论和提示
要切记的一些要害点当在Catalyst 4000时配置路由 模式:
【WS-X4232-L3 路由模块配置和概述为Catalyst 4000家族】您在前面板看的千兆接口 不是 相同作为千兆接 口您看见当您发出 show port from Supervisor 时 。这些是接口吉比特1和接口吉比特2在路由器 。

推荐阅读