3/1 1-1005
3/2 1-1005
Port Vlans allowed and active in management domain
-------- ---------------------------------------------------------------------
3/1 1-3
3/2 1-3
Port Vlans in spanning tree forwarding state and not pruned
-------- ---------------------------------------------------------------------
3/1 1-3
3/2 1-3
假如有show trunk命令的输出 从您的Cisco设备,您能使 用 Output Interpreter显示潜在问题和修正 。使用 Output Interpreter ,您必须是一个 注册的用户,登录,并且安排javascript 被启用 。
bang> (enable) sh port channel
Port Status ChannelAdmin Ch
Mode Group Id
----- ---------- -------------------- ----- -----
3/1 connected on 156833
3/2 connected on 156833
----- ---------- -------------------- ----- -----
Port Device-IDPort-IDPlatform
----- ------------------------------- ------------------------- ----------------
3/1 bang-rp GigabitEthernet3cisco Cat4232
3/2Not directly connected to switch
----- ------------------------------- ------------------------- ----------------
假如有show port channel命令的输 出 从您的Cisco设备,您能 使用 Output Interpreter显示潜在问题和修正 。使用 Output Interpreter ,您必须是一个 注册的用户,登录,并且安排Javascript 被启用 。
路由模块 配置
bang-rp#sh ver
Cisco Internetwork Operating System Software
IOS (tm) L3 Switch/Router Software (CAT4232-IN-M), Version 12.0(7)W5(14.90)INTERIM TEST SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Fri 26-May-00 15:26 by integ
Image text-base: 0x60010928, data-base: 0x605C8000
ROM: System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
bang-rp uptime is 1 day, 22 hours, 7 minutes
System restarted by power-on
System image file is "bootflash:cat4232-in-mz.120-7.W5.14.90"
cisco Cat4232 (R5000) processor with 57344K/8192K bytes of memory.
R5000 processor, Implementation 35, Revision 2.1
Last reset from power-on
1 FastEthernet/IEEE 802.3 interface(s)
4 Gigabit Ethernet/IEEE 802.3z interface(s)
123K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x1
bang-rp# sh run
Building configuration...
Current Configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname bang-rp
!
!
ip subnet-zero
!
!
!
interface Port-channel1
no ip redirects
no ip directed-broadcast
hold-queue 300 in
!
interface Port-channel1.2
!--- This interface is configured for dot1q routing with native vlan 1 to
!--- match supervisor configuration.
encapsulation dot1Q 1 native ip address 1.1.1.2 255.255.255.0 no ip redirects no ip directed-broadcast
!
interface Port-channel1.3
encapsulation dot1Q 3
ip address 1.1.1.2 255.255.255.0
no ip redirects
no ip directed-broadcast
!
interface FastEthernet1
!--- This is the out of band interface that you can use for management.
no ip address
no ip directed-broadcast
shutdown
!
interface GigabitEthernet1
ip address 3.3.3.2 255.255.255.0
no ip directed-broadcast
!
interface GigabitEthernet2
no ip address
no ip directed-broadcast
推荐阅读
- 基础篇 详细介绍路由器的概念
- 详细讲解如何更新路由表
- 金立F5手机怎么样?金立F5手机配置介绍
- 看大片用什么配置的音响
- Cisco2620路由器的配置与维护
- VLAN路由实例
- 配置示例
- 如何备份CISCO路由器的配置
- 荣耀V9什么时候上市?荣耀V9配置怎么样?
- 路由器流量测量