回拨测试config


version 12.0
service exec-callback
!--- This command enables the Cisco IOS software to return a call to a
!--- device that dials in, connects to the EXEC, and requests callback.
service timestamps debug datetime msec
service timestamps log datetime msec
no service passWord-encryption
!
hostname maui-nas-04
!
enable secret 5
!
username austin-01 nocallback-verify callback-dialstring 84001 password 0 xxxxx
!--- Does not require authentication after callback.
!--- This string applies to the "no-verify callback" scenario
username austin-02 callback-dialstring "" password 0 xxxxx
!--- For mobile users. Client specifies the callback number.
!--- This string applies to the "callback to any number with verification"
!--- scenario
!
ip subnet-zero
chat-script offhook "" "ATH1" OK
chat-script rtp ABORT ERROR ABORT BUSY "" "AT" OK "ATDT T" TIMEOUT 45 CONNECT c
!--- This is the chat script used to dial the callback number.
interface Ethernet0/0
ip address 10.0.0.1 255.0.0.0
no ip directed-broadcast
!
ip classless
!
line con 0
transport input none
line 65 70
line aux 0
script modem-off-hook offhook
script callback rtp
!--- Use chat script rtp for the callback
login local
modem InOut
transport input all
callback forced-wait 5
!--- Wait 5 seconds before initiating the callback. This prevents problems with
!--- the router passing the callback string back to the modem before it is
!--- ready to dial the callback connection.
flowcontrol hardware
line vty 0 4
login local
!
end

    推荐阅读