环境Cisco router
问题Some emergency situation is the console port is broken and we can try to Access the router by some other ways.
解答 When the console is good or you can access the router normaly. You should set the passWord on the aux port or on the vty line.
Of course you should remember the enable secret password. If the console broken occur, you can try to telnet the router OR you can put the console line into the aux port when the router has been fully bootup. And you can type the "Enter" and input the aux access password and access to the user mode of the router.
If possible, do the replace of the parts later.
推荐阅读
- 升级updatecisco3524XL经验全集!
- CiscoRouter的若干常见问题
- Cisco2610C的配置实例
- CiscoVPN连接配置实例
- 专用Cisco路由器的替代品Zebra二
- 如何删除IOS--CISCOIFS简介
- Cisco2610A的配置实例
- CISCO学习问题之Cisco路由器中ACL的参数establish的作用
- Catlyst 6509的多出口外连问题
- Cisco路由器上手工方式VPN的实现