【Solaris ifconfig命令】
用于查看和更改网络接口的地址和参数
$ifconfig -a
lo0: flags=849 mtu 8232
inet 127.0.0.1 netmask ff000000
hme0: flags=863 mtu 1500
inet 211.101.149.11 netmask ffffff00 broadcast 211.101.149.255
ether 8:0:20:a7:4d:21
系统会显示网络接口的名称,接口的状态(up or down),
接口的IP地址和掩码等信息
更改网络接口的IP地址:
#ifconfig hme0 down
#ifconfig hme0 211.101.149.233 netmask 255.255.255.0 up
首先,使用down命令参数把网络接口hme0的服务暂时停止,然后再用ifconfig命令给
接口分配新的IP地址和掩码,并启动网络接口服务
也可以通过改变文件/etc/hosts中的IP地址的值并重新启动系统来更改机器的IP地址 。
/etc/hosts/:
211.101.149.11 sampdt
定义主机名在/etc/hostname.hme0及IP地址 。
更改了网卡/增加了网卡,系统不能自动启动该接口服务,这时需要手动创建网口服务:
#ifconfig hme0 plumb
即可以为接口le0创建网口服务
相应地,用ifconfig带unplumb参数可以停止服务并关闭网络
推荐阅读
- 中文打印工具 Solaris 8 打印中文
- Sun Solaris 用户手册 -- 十.改变运行等级
- Solaris 系统安装
- Solaris 软件包管理
- SUN Solaris 2.6系统的克隆方法
- Solaris 性能与调整
- Solaris 系统概念
- Xinetd 在 Solaris 8 安装配置过程
- Sun 的PROM状态命令与参数
- Solaris 安装GCC编译器