freebsd5.2.1上安装vmware 3.2.1( 二 ) _云知道

# make install && make clean

add to /etc/fstab
linproc /compat/linux/proc linprocfs rw 0 0

add to etc/sysctl.conf
kern.ipc.shm_allow_removed=1

add to /etc/rc.conf
gateway_enable="YES"
firewall_enable="YES"
firewall_type="OPEN"
natd_enable="YES"
natd_interface="vr0" #physical ethernet card... put your own
natd_flags=""

Now, we will set the firewall rules. Before we set the firewall rules
make a
backup of the /etc/rc.firewall file. Clear everything from the rc.firewall
file. Add the following to the file:

fwcmd="/sbin/ipfw"
${fwcmd} -f flush
${fwcmd} add divert natd all from any to any via
vr0 <----- again replace vr0 with your physical interface
${fwcmd} add pass all from any to any

edit Kernel config file
options IPFIREWALL
options IPDIVERT
options VFS_AIO # ----> you can also use aio_load="YES" in loader.conf
options SYSVSHM # should already be there
options SYSVMSG # should already be there
options SYSVSEM # should already be there

Recompile kernel, install, reboot

Install using ports.
# cd /usr/ports/emulators/vmware3
# make install
1) Do you want to use netgraph bridging? Yes/No
Answer No
2) What will the IP address of your host on your private network?
I like to use 192.168.2.1
3) What will be the netmask of your private network?
I like to use 255.255.255.0
In VMware Configuration Editor, change Ethernet Adapter to "Host-only"

Edit .cfg file of the virtual machine.
vmnet1.hostOnlyAddress = "192.168.254.1"
vmnet1.hostOnlyNetmask = "255.255.255.0"

--> vmnet1.hostOnlyAddress should be the same as the vmnet1 interface
(use "ifconfig" to get it).

In the virtual machine, statically configure IPaddress to an IP address
on the same network (i.e. 192.168.254.2) and the netmask should be the
same as above. Set default gateway to 192.168.254.1. Add in DNS servers,
and you should be ready to surf the web or whatnot from within your
virtual machine.
After the installation is complete type:

# /usr/local/etc/rc.d/vmware.sh start

Now, run ifconfig to see the new interface: vmnet1. Then, run kldstat to
make sure the proper modules are running for VMware. You should see:
vmmon_up.ko
if_tap.ko
linux.ko

Then you should be able to start vmware, enter the license information
and configure your VM.

Quintin Riis wrote:

> I"m pretty sure that VMware doesn"t currently support 5.x in any fashion.
>
> Quintin
>
> Konrad Heuer wrote:
>
>> Does anyone successfully run VMware 3 on 5.2-R? After upgrading from
>> 5.1-R
>> to 5.2-R my system crashes shortly after VMware begins to initialize.
>>
>> The modules vmmon etc. have been rebuild after the upgrade.
>>
>> Thanks for any hint.
>>
>> Konrad
>>
>> Konrad Heuer (kheuer2 at gwdg.de) ____ ___ _______
>> GWDG / __/______ ___ / _ )/ __/ _
>> Am Fassberg / _// __/ -_) -_) _ | / // /
>> 37077 Goettingen /_/ /_/ __/__/____/___/____/
>> Germany
>> _______________________________________________
>> freebsd-questions at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to
>> "freebsd-questions-unsubscribe at freebsd.org"

freebsd5.2.1上安装vmware 3.2.1( 二 )

推荐阅读

做秋梨膏用红枣干可以吗?

祝福词

win10任务栏开启搜索框

戒指怎么选圈口戒指怎么选圈口大小

炉具不打火怎么回事

EDG夺冠福利英雄联盟夺冠庆典活动一览

快手b类违规是啥意思

客厅推拉门价格贵吗？客厅推拉门大概多少钱

手机如何下载抖音视频到相册手机如何下载抖音视频

如何设置无密码远程连接

唐山9月房价,唐山的房价如何

精选初三作文：心助远航

飞机彩色幼儿飞机的画法图解简笔画

脸颊长痘如何有效去除脸颊长痘怎么办

已更新到602没有你们说的bug,而且特别省点

过生日以身份证为准吗