Tape Driver Configuation Program1.Install a Tape Driver2.Remove a Tape Driver3.Change default Tape DriverSelect an option or enter q to quit:键入3,并回车,屏幕显示:1.Cartridge Tape Drive2.Mini-Cartridge Tape Drive3.QIC-40 or qic-80 Tape Drive4.SCSI Tape DrivePlease select which tape drive you would like to have linked to default dev iceor enter q to return to the main menu:键入4,并回车,屏幕显示:Default SCSI Tape Drive Updated Menu1.SCSI Tape Drive(Cartridge,Exabyte,9-Track,DAT)2.Compaq SCSI Tape DrivePlease select which tape drive you would link to have linked to default dev ice or enter q to return to the main menu;键入1,并回车,屏幕显示:Default special device have been created with the following links:/dev/xcto linked to /dev/xStp0/dev/rct0 linked to/dev/rStp0 and /dev/rmt/ob …… Enter new string,"rm"to remove string, or enter to leave current stringa s is:键入q,并回车,屏幕回到初始信息,键入q,并回车,回到超级用户下,至此就可以用TAR命 令读/写磁带 。2.方法2,具体步骤如下:(1)在超级用户下,键入命令"#mkdev tape",并回车 。(2)屏幕显示:Tape Driver Configuration Program1.Install a Tape Driver2.Remove a Tape Driver3.Change default Tape DriverSelect a option or enter q to quit:1.Install Cartridge Tape Driver2.Install Mini-Cartridge Tape Driver3.Install Qic-40/Qic-80 Tape Driver4.Install SCSI Tape DriverSelect an option or enter q to return to main menu:键入4,并回车,屏幕显示:SCSI Tape Drive Installation Menu:SCSI Tape Drive Installation Menu:1.Install SCSI Cartridge Tape Driver2.Install Exabyte Tape Driver3.Install SCSI 9-Track Tape Driver4.Install SCSI DAT Tape Driver5.Install Compaq SCSI Tape DriverSelect an option or enter q to return to main menu:键入1,并回车,屏幕显示:The SCSI Cartridge Tape Drive must be configured before use:Do you wish to configured the SCSI Cartridge tape Drive now?(y/n):键入y,并回车,屏幕显示:Enter the prefix of the SCSI host adapter that supports this device or pres s＜Return＞for the default:"arad"Enter h for a list of host adadpter or enter q t o quit:回车取默认值,屏幕显示:Which"arad"SCSI host adapter supports this device?Select 0～2,or enter q to quit:键入0,并回车,屏幕显示:What is the Target ID for this device?Select 0～7,or h for help,or q to quit:根据开机时显示SCSI各种设备时显示的ID号题入,开机时显示TANDBERG磁带机ID号为2, 故键入2,并回车,屏幕显示:Host Adapter Type Device Adapter Number ID LUNarad Stp 0 2 0Update SCSI Configuration?(y/n)键入y,并回车,屏幕显示:Default special device have been created with the following links:/dev/xct0 linked to /dev/xStp0/dev/rct0 linked to/dev/rStp0 and/dev/rmt/0b…Enter new string,"rm"to remov e string,or enter q to leave current string as is:键入q,并回车,显示原来刚开始的 信息,键入q,并回车,接着显示:You must creat a new kernel to effect the change you specified.Do you wisht o creat a new kernel now?(y/n)键入y并回车,下面提示新建的内核是否作为 默认引导内 核,键入y,下面提示设置内核环境,键入y,重新启动,如配置无显示错误,再用TAR命令执行无 误,至此安装成功 。如有错,则查看卡参数是否与安装时输入的参数一致,卡是否插紧,电缆线 是否接的对,电源是否接上,再看是否与系统其它设备发生冲突,再用"#mkdev tape"命令直至 无误 。
(http://www.fanqiang.com)
SCO中如何安装配置SCSI磁带驱动器?
如果SCSI主适配器没有安装，你需要先安装它，再继续安装SCSI磁带驱动器 。SCSI磁带驱动器有1/4-inch,8mm和DAT 3种格式,安装步骤如下：第一步 以root登录，并确认系统在维护模式 。
第二步 通过三种方式进入硬件/核心管理 。
1 桌面：System Adminisfration→
Hardware/Kernel Manager
2 通过命令行，启动系统管理菜单并选择
“Harduare/Kernel Manager”：
scaodmin→Hardware /Kernel Manage
3 直接用命令行： mkdev tape
第三步 选择第一项“Configure SCSI tape drive”
推荐阅读
- SCO UNIX下的时间问题
- unix下的hosts文件
- Sco openserver unix下安装双网卡的一些建议
- sar在维护UNIX中的使用讲解
- Unix网络的两个安全问题
- 简单的介绍UNIX下的常用编辑工具VI
- Unix操作系统网络相关的两个安全问题
- Sco Unix下用dbxtra调试C程序
- UNIX文件系统的挽救技巧
- UNIX入侵检测