云南龙网

  1. 首页 > 云知道 > >

SAMSUNGSR4901ISDNROUTER配置方法

云知道



IP(static)/PPP/Security(Out)/Unnumbered/NAT(PAT)
PC1 --> SR --> ISDN --> ISP

PC2 -----
PC1 :
Ethernet : 214.100.10.2255.255.255.0
Gateway: 214.100.10.1
PC2 :
Ethernet : 214.100.10.3255.255.255.0
Gateway: 214.100.10.1
SR:
Ethernet : 214.100.10.1255.255.255.0
Serial: 0.0.0.00.0.0.0
Outgoing ID: son
Outgoing PassWord : son-out
NAT Global IP : 123.12.12.1255.255.255.0
First, We are set the NAT Global IP with temporary IP (123.12.
12.1).
When we are connect to ISP, ISP send to me a ONE IP Address dy
namically.
That IP Address will be copy in NAT Global IP automatically.
(123.12.12.1 -> Delete)
ISP Tel No: 3448-8897
====================================================================
SR"s configuration
1. Special Link/WAN/PPP over ISDN (for Serial IP)
ChannelChannel-1
Channel StatusUp
ISDN Dest Addr 34488897
ISDN Dest Sub Addr (blank)
IP Configuration
Admin StatusUp
IP Address0.0.0.0
Network Mask0.0.0.0
Routing ProtocolNone
IPX Configuration
IPX Network Number(blank)
Admin StatusDown
Oper Status(blank)
Bridge Configuration
Base Bridge StatusDown
STP StatusDown
2. Special Link/IP Routing/Static Route (for static table)
Destination Address0.0.0.0214
.100.10.1
Subnet Mask0.0.0.0255
.255.255.0
ChannelChannel-1Ethernet
X.25 Virtual Circuit number00
Address of the next hop(Gateway)0.0.0.00.0.0.
0
Metric associated with the route11
Static Route statusEnableEna
ble
3. Special Link/PPP/Router Security (for Outgoing)
Router Name: son
Outgoing Password: son-out
4. Features/NAT (for NAT)
NAT Table
Global IP address: 123.12.12.1
Subnet Mask: 255.255.255.0
NAT entry status: Create
Net Map list.: 214.100.10.0,255.255.255.0;
Enable NAT in the router: Yes
NAT Global
NAT port translation required: Yes
--Be careful--
Until Version 1.4 -->
Net Map list : 214.100.10.2,255.255.255.0,*-1300;214.100.10.3,
255.255.255.0,*-1310;
From Version 1.4.1 -->
Net Map list : 214.100.10.0,255.255.255.0;

    推荐阅读


    上一篇：甘蓝黑根病的防治

    下一篇：锤子m1/m1l搜索不到无线信号怎么办？锤子m1/m1l搜索不到无线信号解决方法