监测清单5-2使用RIP协议处理VLSM和配置被动接口
第1段:RIPv1配置下的路由表
R3#sh ip route rip
172.16.0.0/30 is subnetted, 3 subnets
R 172.16.123.0 [120/1] via l72.16.123.5,00:00:12,Serial0
[120/1] via l72.16.123.9,00:00:12,Serial1
第2段:配置RIPv2和no summary
R3#conft
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#router rip
R3(config-router)#ver 2
R3 (config-router)#no auto-summary
Term_Server>2
[Resuming connection 2 to R2 ... ]
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#router rip
R2(config-router)#ver 2
R2(config-router)#no auto-summary
Term_Server> 1
[Resuming connection 1 to R1 ... ]
R1#conft
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#router rip
R1(config-router)#ver 2
R1 (config-router)#no auto-summary
R1(config-rotuer)#end
R1#
R1#sh ip prot
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 5 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
Redistributing: rip
Default version control: send version 2, receive version 2
Interface Send Recv Triigered RIP Key-chain
Ethemet0 2 2
Serial0 2 2
Serial1 2 2
Automatic network summarization is not in effect
Routing for Networks:
172.16.0.0
172.18.0.0
Routing Information Sources:
Gateway DistanceLast Update
172.16.123.6 120 00:00:06
172.16.123.2 120 00:00:04
Distance: (default is 120)
R1#sh ip route rip
172.16.0.0/30 is subnetted, 3 subnets
R 172.16.123.8 [120/1] via 172.16.123.2, 00:00:06, Serial0
[120/1] via 172.16.123.6, 00:00:22, Serial1
172.18.0.0/16 is variably subnetted, 3 subnets, 2 masks
R 172.18,2,0/28 [120/1] via 172.16.123.2,00:00:06,SerialO
R 172.18J.O/24 [120/1] via 172.16.123.6, 00:00:22, Serial1
第3段:配置 passive interface
R1#debug ip rip
RIP protocol debugging is on
R1#
02:59:47: RIP: received v2 update from 172.16.123.6 on Serial1
02:59:47: 172.16.123.8/30 via 0.0.0.0 in 1 hops
02:59:47: 172.18.2.0/28 via 0.0.0.0 in 1 hops
02:59:47: 172.18.3.0/24 via 0.0.0.0 in 1 hops
R1#
02:59:51: RIP: sending v2 update to 224.0.0.9 via Ethernet 0(172.18.1.1)
02:59:51: RIP: build update entries
02:59:51: 172.16.123.0/30 via 0.0.0.0, metric 1, tag 0
02:59:51: 172.16.123.4/30 via 0.0.0.0, metric 1, tag 0
02:59:51: 172.16.123.8/30 via 0.0.0,0, metric 2, tag 0
02:59:51: 172.18.2.0/28 via 0.0.0.0, metric 2,tab 0
02:59:51: 172.183.0/24 via0.0.0.0,metric 2,tag 0
02:59:51: RIP: sendiag v2 update to 224.0.:0.9viaSaialC-172.15.t23.1)
02:59:51: RIP: build update entries
02:59:51: 172.16.123.4/30 via 0.0.0.0, metric 1, tag 0
02:59:51: 172.18.1.0/28 via 0.0.0.0, metric 1, tag 0
02:59:51: 172.18.3.0/24 via 0.0.0.0, metric 2, tag 0
R1#
02:59:51: RIP: sending v2 update to 224.0.0.9 via Serial1(172.16.123.5)
02:59:51: RIP: build update entries
02:59:51: 172.16.123.0/30 via 0.0.0.0, metric 1, tag 0
02:59:51: 172.18.1.0/28 via 0.0.0.0, metric 1, tag 0
02:59:51: 172.18.2.0/28 via 0.0.0.0, metric 2, tag 0
R1#u all
All possible debugging has been turned off
R1#conft
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#router rip
R1(config-router)passive-interface ?
Ethernet IEEE 802.3
Null Null interface
SerialSerial
defaultSuppres s routing updates. on all interfaces
推荐阅读
- 边界网关协议学习指引
- 1 RIP协议的基本配置
- adobe reader xi如何使用保护模式?
- 在Vovida的基础上实现自己的SIP协议栈②
- 使用整整一个月来评价一下
- 微信通话怎么录音
- adobe reader xi如何使用签名文档?
- 802.1x协议解析
- 假牙怎么清洗变白
- 爽肤水和乳液使用步骤是什么