按F2键继续安装；
8、出现如下提示：
q Network Connectivity qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
Specify Yes if the system is connected to the network by one of the Solaris
or vendor network/communication Ethernet cards that are supported on the
Solaris CD. See your hardware documentation for the current list of
supported cards.
Specify No if the system is connected to a network/communication card that
is not supported on the Solaris CD, and follow the instructions listed under
Help.
Networked
qqqqqqqqq
[X] Yes
[ ] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
安装程序提示系统是否连接了网络？使用上下箭头键移动 ， 在合适的位置停止后 ， 按空格键 ，
选中该选项；
在我们的安装中 ， 需要网络功能 ， 因此按F2键继续安装；
9、出现如下提示：
q DHCP qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify whether or not this system should use DHCP
for network interface configuration. Choose Yes if DHCP is to be used, or
No if the interfaces are to be configured manually.
NOTE: DHCP support will not be enabled, if selected, until after the system
reboots.
Use DHCP
qqqqqqqq
[ ] Yes
[X] No
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示是否需要使用DHCP来配置主机的IP地址；
在我们的安装中 ， 不使用DHCP功能 ， 因此按F2键继续安装；
10、出现提示：
q Primary Network Interface qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must specify which of the following network adapters is
the system"s primary network interface. Usually the correct choice is the
lowest number. However, do not guess; ask your system administrator if
you"re not sure.
> To make a selection, use the arrow keys to highlight the option and
press Return to mark it [X].
Primary network interface
qqqqqqqqqqqqqqqqqqqqqqqqq
[X] ce0
[ ] ge0
[ ] eri0
[ ] fcip0
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
选择主网卡（Primary Network Interface）
在我们的安装例子中 ， 使用上下箭头键移动光标 ， 移动到eri0处 ， 按空格键选中该网卡 ，
按F2键继续安装；
11、出现提示：
q Host Name qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must enter your host name, which identifies this system
on the network. The name must be unique within your domain; creating a
duplicate host name will cause problems on the network after you install
Solaris.
A host name must be at least two characters; it can contain letters, digits,
and minus signs (-).
Host name:rac1
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
输入主机名 ， 本例中 ， 我们输入主机名rac1后按F2键继续安装；
12、出现提示：
q IP Address qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
On this screen you must enter the Internet Protocol (IP) address for this
system. It must be unique and follow your site"s address conventions, or a
system/network failure could result.
IP addresses contain four sets of numbers separated by periods (for example
129.200.9.1).
IP address:192.168.0.1
qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
F2_Continue F6_Help
提示输入主机的IP地址 ， 本例中 ， 输入192.168.0.1后按F2键继续安装；
推荐阅读
- 挖财群组AA账本怎么使用？挖财群组AA账本使用方法
- Solaris 8 使用及编辑PostScript字体
- 7270使用后的体会
- Solaris 8 设置终端 TTY
- 荣耀v20中打开蓝牙的操作教程
- Solaris 使用技巧
- 添加了ssh软件安装 Solaris 系统安全实施总结
- vivo超声波隐形指纹怎么使用教程
- Solaris DNS安装和配置
- 安装 Solaris 操作系统